Menu
Cart

Under-Counter

  • $ 1,995.00


NEW PRODUCT FEATURES: 

• Proudly made in the USA
• BPA-free, non-toxic materials and components 
• Approximately one year until first filter change
• Precision over-sized water saver filters
• Pentair encapsulated membrane for easy replacement
• Aquatec permeate pump enhances system performance  
• John Guest quick connect fittings with locking clips
• Quality installation kit includes ceramic disc chrome finished faucet
• Water storage tank holds up to 3.2 gallons
• TDS meter to check water quality and monitor filter-life
• Requires plumber or handyman installation
• Step-by-Step Installation Manual 

Recommended Accessories: FLOWLOK Leak Protection System

DIMENSIONS:

Filter Assembly: H 18.5" x W 16" x D 7"
Water Storage Tank Assembly: H 16" x D 11" 

Attach this system to your refrigerator for PristineHydro COLD WATER and ICE on demand! Also, works with bottles less HOT + COLD dispensers. 

All of PristineHydro’s Water Revival Systems produce water that is 100% free of all undesirable acids and contaminates. The water has a high magnesium bicarbonate content, with traces of calcium and sodium bicarbonate, as well as silica and chloride. This results in an ideal, low TDS of around 40 PPM.

The Pentair's encapsulatd 75 GPD High Efficiency Reverse Osmosis Membranes that has a waste to recovery rate of 1:1, which means that for every one gallon of water that is made, one gallon goes down the drain. Most reverse osmosis systems have a waste to recovery rate of five to one, which means that for every gallon made five go down the drain.

Many people like to change filters pro-actively in order to maintain high system performance, rather than waiting for degradation. In that case, we suggest changing the 5 Micron, KDF + Carbon, every 12 months and the DIs every 24 months, depending on usage and the TDS of the source water. The High Efficiency Reverse Osmosis Membrane, Remineralization Cartridge, and the Coconut Carbon should be changed every three years, again, it depends on usage and the TDS of the source water.

All of our PristineHydro™ Revival Systems have a Flush Valve, which dramatically extends the life of the High Efficiency Reverse Osmosis Membrane. Once a month (depending on usage, more often if you are making a lot of water) open the Flush Valve for 2-3 minutes while the unit is making water. When you open the Flush Valve you should hear a flushing sound, this flushes out deposits in the membrane.

All PristineHydro™ Water Revival Systems require a minimum 40 lbs of water pressure for proper performance. If your water pressure is low we sell booster pumps – call the office.


We Also Recommend